Making calls, Basics – Sony SPP-AQ500 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Basics
Making calls
1
2
3
Press (
talk
) and wait until the
TALK/BATT LOW lamp lights up.
You then hear a dial tone. If you hear
beeps, move closer to the base unit.
Dial the phone number.
When you’re done talking, press
C
talk
), or replace the handset on the
base unit.
The TALK/BATT LOW lamp goes off.
Additional tasks
To
Do this
Select better channel
(only on the handset)
Press ( CHANNEL ).
Switch to tone dialing
temporarily
Press
TONE
(*)
after
you’re
connected.
The line will remain in tone dialing until
disconnected.
If the handset battery becomes weak during a call
The handset will beep every three seconds. The call will be
disconnected after one minute. Replace the handset on the base unit
to charae.
14™
Basics