Sony CDP-CE315 - Manual (Page 15)

Recording From CDs
V When you record on side reverse the tape and
press t>- or II on the player to resume playing.
To cancel Time Edit
Press CONTINUE.
*Q' You can program the tracks you want in advance
Select Eire tracks before doing the above procedure. The
player creates a program from the remaining tracks.
You can freely specify the tape length
Set the tape length using the iKKI AMS »11 control.
Example: When the tape length of one side is 30 minutes
and 15 seconds
1 To set the minutes, turn [KK AMS >C>fl until
"30" appears in the display, then push
KW AMS
2 To set the seconds, turn IKKl AMS >t>fl until
"15" appears in the display, Oren push
D
You can check and change the program
See page 13.
Fading In or Out
You can manually fade in or out to prevent tracks from
starting or ending abruptly.
Note that you caimot use this effect when you use the
DIGITAL OUT (OPTICAL) connector.
Oil
To Press FADER
Start play fading in During pause. lights up in
the display and the indication
flashes. The play fades in.
End play fading out When you want to start fading out,
рмое“| lights up in the display and
the indication flashes. The play
fades out and the player pauses.
Note
Fading lasts for about 5 seconds. However, when you press
the FADER button during Music Scan (see page 10), the play
fades out for about 2 seconds.
Fading out at the specified time
(Time Fade) (CDP-CE315 and CDP-CE215
only)
You can have the player fade out automatically by
specifying the playing time. Once you set the Time
Fade, it works twice, that is, the play fades out at the
end of both sides of a tape.
1 Press EDIT/TIME FADE repeatedly before you
start playing imtil
"A" in the foLol
indication appear in the display.
Press or ►► to specify the playing time.
Each time you press these buttons, the display
changes as shown below, with the playing time of
one side following each indication.
, C-46-»-fC-54-
(23.00) (27.00)
« C-60 +■
(30.00)
* C-74 +■
(37.00)
+ C-90 -b
(45.00)
(Continued)
15 EN