Sony GV-D900 - Manual (Page 72)

1 Trouble check
Picture
Symptom Cause and/or corrective actions
The picture is "noisy" or does not appear. • The video heads may be dirty.
-> Clean the heads using the Sony DVM12CL (not
supplied) cleaning cassette, (p. 66)
© indicator flashes on the LCD screen. • The video heads may be dirty.
■ > Clean the heads using the Sony DVM12CL (not
supplied) cleaning cassette, (p. 66)
The picture is too bright or too dark. • LCD BRIGHT is not adjusted properly.
■* Press + or - to obtain the brightness you want. (p. 9)
The picture does not appear on the LCD
screen. • Incorporated fluorescent tube is worn out.
-> Please contact your nearest Sony dealer.
others
Symptom Cause and/or corrective actions
While editing using the DV connecting
cable, recording picture cannot be
monitored. • Remove the DV connecting cable, and connect it
again.
The VCR becomes warm. • If the power of the VCR is on for a long time, it
becomes warm, which is not malfunction.
No function works though the power is
on. • Disconnect the connecting plug on the AC adaptor/
charger or the battery pack, then reconnect it in about
one minute. Turn the power on. If the functions still
do not work, press the RESET button at the bottom of
the VCR using a sharp-pointed object. (If you press
the RESET button, all the settings including the date
and time return to the factory setting.) (p. 82)
The numbers or letters of 5 characters is
displayed as a counter. • Self-diagnosis function was activated.
■> See the table in page 74 and treat the VCR
apropriately.
Symptom Corrective actions
The VTR/CAMERA or CHARGE lamp
does not light. • Disconnect the power cord. After about one minute,
reconnect the power cord. (p. 7)
The CHARGE lamp flashes. • See the chart on the next page.
72