The button functions at any time, Turning off the entire system, Turning off the components – Sony RM-SC200 User Manual
Page 9: Other component, Note, Turning on the components, Note on vcr 1 and vcr 2 button, When you turn on a cable box, Using the commander
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using the Commander
The Commander allows you to control most
of your components' functions.
The button functions at any
time
Turning off the entire system
Press the SYSTEM OFF button.
Turning off the components
TV
Press the TV OFF button.
Other component
1
Press the UNIT OFF button.
The "UNIT" indication appears and
"OFF" appears.
2
Press the function button for each
component within five seconds.
Note
Hold down the UNIT OFF button and press
the desired function button; the respective
component will be on/off according to its
current on/off mode.
Turning on the components
Press the function button for each
component.
Note on VCR 1 and VCR 2 button
Press the VCR 1 or VCR 2 button. The
component turns on. When you press the ►,
or MENU/PROG button, the receiver input
switches to the component and the
component picture appears on the TV.
The function buttons except for the VCR 1
and VCR 2 button turn on each component
and switch the receiver input to the
components respectively.
When you turn on a cable box
When the power of the cable box is off, you
cannot power on the cable box with the
Commrmder, Make sure that the power of
the cable box is always on.
Continued