Setting up the vcr 1 and vcf 2 buttons, Setting up the commander – Sony RM-SC200 User Manual

Page 6

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

About This Manual

Notes

• When the audio/video components(VCR,

DVD player, and DBS tuner) are not
compatible with the S-Link system, switch
the input of the TV manually.

• Make sure to connect the audio

components to the receiver when the
components are not compatible with the S-

Link system.

• When the audio component (CD player,

MD player, or tape deck) has a

mechanical power switch, connect the
AC power cord of the audio component

to the switched AC outlet of the

receiver.

• Make sure that the power of the cable

box is always on.

• When the receiver is compatible with the

VisionTouch system, you do not have to
connect the S-Link/CTRL S in terminal of
the receiver to the TV.

Setting up the
Commander

Before use, you need to set up the function
buttons (VCR 1, VCR 2, and DBS/CATV).

Setting up the VCR 1 and VCF
2 buttons

Assign the categories of your components t<
the VCR 1 and VCR 2 buttons.

Make sure that the slide cover is closed.

While pressing down the VCR 1 or VCR

2 button, press the SYSTEM OFF button
repeatedly.
Each time you press the SYSTEM OFF
button, the indication changes as follow

VTR 3 (for^VHS VCR)

VTR 2 (for 8mm VCR)

VTR 1 (for 1? VCR)

DVD (for Digital Video Disc player

Release the VCR 1 or VCR 2 button wht
the category you want to assign appear: