Specifications, Audio power specifications, Other specifications – Sony STR-AV1070X User Manual
Page 38: Power output and total harmonic distortion, Amplifier section
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Specifications
Audio Power Specifications
Other Specifications
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
With 8-ohm load, both channels driven, from 20 - 20,000
Hz, rated 120 watts (STR-AV1070X) or 100 watts (STR-
AV970X) per channel minimum RMS power, with no
more than 0.015% (STR-AV1070X) or 0.03% (STR-
AV970X) total harmonic distortion from 250 milliwatts to
rated output.
Amplifier section
STR-AV1070X
STR-AV970X
Dynamic power
output
8 ohms, at 1
kHz IHF
195 + 195
watts
140+140
watts
4 ohms, at 1
kHz IHF
250 + 250
watts
190 T 190
watts
Harmonic distortion at rated
output
Less than
0.015%
Less than
0.03%
Intermodulation (IM) distortion at
rated output
Less than
0.015%
Less than
0.03%
Power output of center amplifier
(STR-AV1070X only)
30 watts
(15 + 15 watts, 8 ohms at 1kHz)
Power output of surround(REAR)/
DRLC amplifier {8 ohms, at 1kHz)
15 + 15 watts
Frequency
response
PHONO
RIAA equalization curve ±0.5
dB
CD, DAT,
TAPE 1,2
VIDEO 1,2,3*
10 Hz —70kHz:"dB
Residual noise
Less than 70|iV
Damping factor
(8 ohms, at 1kHz)
50
Input sensitivity/
impedance
PHONO MM
2.5 mV, 50 kilohms
DAT,CD,
VIDEO 1,2,3*
TAPE 1,2
150 mV
50 kilohms
S/N
PHONO MM
87 dB
79 dB** (A,2.5mV)
DAT, CD
VIDEO 1,2,3*
TAPE 1,3
105 dB
85 dB** (A,150mV)
Output
DAT OUT,
TAPE OUT 1,2
VIDEO 1
150 mV
10 kilohms
SPEAKERS
Accepts seakers of 8-16 ohms
HEADPHONES Accepts headphones of high
and low impedance
CENTER OUT,
REAR OUT
2.5 V, Ikilohm
PRE OUT
1 V, IKilohm
MUTING
-20dB
DBFB
+ 10 dB (70 Hz)
Graphic Equalizer
7-band ±10 dB at 63Hz, 160
Hz, 400Hz,1kHz, 2,5 kHz, 6,3
kHz and 16 kHz
-STR-AV1070X only
-- 781HF
38