Audio recording, Recording on an audio tape deck or dat deck, 2 set the tape (dat) deck in the recording mode – Sony STR-AV1070X User Manual
Page 23: 3 start the selected program source, Notes on recording, Monitoring the recorded sound
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Audio Recording
Recording on an Audio Tape Deck or DAT Deck
Tape Dubbing
POWER — ON
LÌ3
Og
i
TZZn“
to DAT or
TAPE 1. 2 OUT
ir
Record player
2
DAT or Tape deck
CD player
3
VCR
1
Select the desired program source with the
FUNCTION selector.
For an FM/AM broadcast, tune in the desired station
2
Set the tape
(DAT)
deck in the recording mode.
3
Start the selected program source.
1
Insert the recorded tape into tape deck 1 (or the
DAT deck).
2
Insert a blank tape into tape deck 2 and adjust the
recording level.
3
Press TAPE 1 or DAT to select the deck for
playback.
4 Start the playback of the tape (or the DAT) in tape
deck 1 (or the DAT deck), and set tape deck 2 in the
recording mode.
Dubbing will start.
Notes on recording
•
Use ADAPTOR OUT for the recording with the
equalizer and SURROUND effects.
•
For other REC OUT jacks, the settings of the VOLUME,
SURROUND, BALANCE, and graphic equalizer do not
have any effect on recording.
Monitoring the recorded sound
If you have connected a tape deck having separate record
and playback heads to the TAPE 2 jacks, you can monitor
the recording results. While recording or dubbing, press
the TAPE 2 MONITOR button. To listen to the source sound
again, press the button again.
Note on tape dubbing
Tape dubbing is possible only in the following directions:
From
(playback side)
To
(Recording side)
FUNCTION
selector to be
pressed
Tape deck
connected to
TAPE 1 IN
Tape deck connected
to TAPE 2 OUT
TAPE 1
DAT deck connected
to DAT OUT
DAT deck
connected to
DAT IN
Tape deck connected
to TAPE 1 or 2 OUT
DAT
23