The two remote commanders must, Number of signals that the commander can learn, How to use the tearing funciton (str-av1070x only) – Sony STR-AV1070X User Manual
Page 34
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
How to Use the Learning Function (STR-AV1070X only)
Programming Signals of Other Audio/Video Equipment with Programmable System Commander RM-P311
1,4
USER STD
SONY
STD
LEARN
Other
manufacturer's
remote
commander
Approx. 5 cm
(2 inches)
Programmable
commander RM-P311
©
-■ &
USER STD
SONY
STD
LEARN
The RM-P311 learns various functions of other remote
commanders emitting infrared rays and allows you to
control most of audio and video equipment from a distance.
1
Set the mode selector to LEARN.
2
Program a signal.
® Press and hold the button which shall “learn" the
remote-control signal until the LEARN indicator
lights up.
® Press and hold the button of other manufacturer's
remote commander whose signal is to be learned.
® Remove your finger(s) from the button(s) after the
LEARN indicator goes off.
The two remote commanders must:
• face straight each other.
• be placed at a distance of approx. 5 cm (2 inches).
• not be moved during programming operation.
3
Repeat operation for each button to be programmed.
4
Set the mode selector to USER STD or SONY STD.
After programming
Be sure to test if the equipment really works with the
programmed signals.
Number of signals that the commander can learn
It depends on the format of the signal. If you program
signals of Sony equipment, approximately 50 - 60 signals
can be programmed.
34