Sony CCD-TRV12 - Manual (Page 6)

Getting started
Charging and installing the battery pack
Before using your camcorder, you first need to charge and install the battery pack. To
charge the battery pack, use the supplied AC power adaptor.
Charging the battery pack .
Charge the battery pack on a flat place without vibration.
( 1 ) Connect the AC power adaptor to the wall outlet.
(2) Align the right side of the battery pack with the line on the AC power adaptor,
then slide the battery pack in the direction of the arrow.
(3) Set the selector to CHARGE. The CHARGE lamp (orange) lights up. Charging
begins.
When charging is completed, the CHARGE lamp goes out. Unplug the unit from the
wall outlet, and then remove the battery pack and install it on the camcorder.
Charging Time
Battery pack NP-33(supplied) NP-98/98D NP-80/80D NP-78 NP-68 NP-C65 NP-60D
Charging time*(min) 60 215 190 170 125 105 90
^Approximate minutes to charge an empty battery pack using the supplied AC power
adaptor. (Lower temperatures require a longer charging time.)
Battery life
CCD-TRV12fTRV112
Battery pack NP-33(supplied) NP-98/98D NP-80/80D NP-78 NP-68 NP-C65 NP-60D
While
LCD open" 65 (30) 225 (120) 195 (105) 180 (100) 140 (75) 115 (60) 100 (55)
recording" LCD close
85 (40) 300 (160) 255 (140) 230 (125) 175 (95) 155 (85) 130 (70)
While playing back on
LCD" 65 225 195 180 140 115 100