Editing onto another tape, To edit more scenes, To stop editing – Sony CCD-TRV12 User Manual
Page 30
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Editing onto another tape
You can create your own video program by editing with any other @ 8 mm.
Hi El
Hi8,
IVHS VHS, SIVMS S-VHS, IVHSLH VHSC, SVHSLH S-VHSC,
id
Betamax or Hasetal ED Betamax
VCR that has video/audio inputs.
Turn down the volume of the camcorder while editing. Otherwise, picture distortion
may occur.
After connecting the camcorder to the VCR,
(1) Set the POWER switch to PLAYER.
(
2
)
Insert a blank tape (or a tape you want to record over) into the VCR and insert
your recorded tape into the camcorder.
(3)
Play back the recorded tape on the camcorder until you locate the point where
you want to start editing, then press 11 to put the camcorder in playback pause
mode.
(4)
On the VCR, locate the recording start point and put the VCR in recording
pause mode.
(5)
Press II on the camcorder and VCR simultaneously to start editing.
To edit more scenes
Repeat steps 3 to 5.
To stop editing
Press H on both the camcorder and VCR.
30