Sony CCD-TRV12 - Manual (Page 34)

Playback modes
The playback mode (SP/LP) is selected automatically according to the recording system
in which the tape has been recorded. The quality of the recorded picture in LP mode,
however, will not be as good as that in SP mode.
Recording mode
When you play back a tape recorded in LP mode, the LP indicator lights up in the
viewfinder or on the LCD screen.
Foreign 8 mm video
You cannot play back tapes recorded on a different TV color system. Because the TV
color systems differ from country to country, you may not be able to play back foreign
prerecorded tapes. Refer to the list of "Using your camcorder abroad" to check the TV
color system of foreign countries.
34
Tips for using the battery pack
This section shows you how you can get the most out of your battery pack.
Preparing the battery pack
Always carry additional batteries
Have sufficient battery pack power to do 2 to 3 times as much recording as you have
planned.
Battery life is shorter in cold environment
Battery efficiency is decreased, and the battery will be used up more quickly, if you are
recording in cold environment.
To save battery power
Turn the STANDBY switch on the camcorder down when not recording to save battery
power.
A smooth transition between scenes can be made even if recording is stopped and
started again. While positioning the subject, selecting an angle, or looking through the
viewfinder lens or on the LCD screen, the lens moves automatically and the battery is
used. The battery is also used when a cassette is inserted or removed.