Sony GV-M20 - Manual (Page 9)

Playing Back Tapes
Make Sure №at trie power source is attached to this ut
1 Attach the DC pack to the video recorder/monttor by aligning the upper side edge of the DC
pack with the white line on the video recorder/monitor and elide the DC pack in the direction .
of the ^ mark while preeeing It.
2 Plug the power cord into the cigarette lighter socket.
Notes
• Be careful not to let any metal object touch the metal projection on the battery pack. When the battery
pack IS not in use, keep
• Keep the video recorder/monitor away from any power source. Such sources may cause noise to appea
on the screen.
Cautions on using this unit in a car
• For your safety, do riot watch video tapes or operate the controls while driving.
• Avoid leaving the unit in a place with very high temperatures. If you do. it may cause distortion of the
cabinet or malfunction of the unit.
• If you use this unit while the car engine is stopped, the car battery will be discharged. Avoid runnir>g
this unit from the car battery more than 12 hours without recharging it.
• Remove the car bailery cord from the cigarette lighter socket if you do not use the unit for a long
1 Press OPEN A and open the display.
. 2 Press EJECT*.
The cassette holder opens automatically
Do not open the cassette holder forcibly.
3 Insert a cassette with the window side fecirvg up.
4 Press the PUSH mark.
The cassette holder closes automatically.
When you press EJECT *. power Is supplied and the cassette holder opens even if me power off. After the cassette holder opens, the power goes oft automaticaHy. Press POWER if you want to
continue the operation.