Sony GV-M20 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Recording or Editing Tapes
e other VCR is stereo type, use the VMC-910MS or VMC-920MS (not supplied)
' 1 Turn on the power of t>oth unite.
2 Insert e source tape Into this unit (playback) and a tape for recording into the other VCR
(recording).
3 Select the tape apeed (SPA^) on the other VCR.
4 Activate the EDIT function if it ie provided with the other VCR.
5 Locate the playbacli start point artd press PAUSE N on this unit.
6 Put the other VCR Into recording pause mode
7 Press the pause buttons (PAUSE ■ on this unK) on both units to release the pause.
8 Press the pause buttons on both units to pause the units again.
I
9 Repeat steps 7 and 8 to edit more scenes.
; 10 After editing la completed, press the stop buttons (□ on this unit) on both units to stop
, playback and recording.
v t o e o A W K ) 1
The VIDEO/AUDIO input/outpul jacks automatically become ei
operating modes of this unit.
r input or output jacks according to the
AUDIO input/outpui
VIDEO input/outpu!
Relation between the operating mode and the input/output status
The current status will appear on the screen tor five seconds m the loilowing cases:
• When the status has changed
• When you press DiSPLAV
1