Voltage selector, Step 2: setting the time – Sony LBT-G1300 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connect the FM/AM antennas.
Set up the AM loop antenna, then
connect it.
AM loop antenna
Extend the FM wire
antenna horizontally.
Q Set VOLTAGE SELECTOR to the
position of your local power line
voltage (For LBT-Gl only).
VOLTAGE SELECTOR
110V-120V--------------------
1 I
---------------220V-240V
Q Connect the AC power cord to a
wall outlet.
If the plug of this unit does not fit your
wall outlet, detach the supplied adapter
from the plug (Except for North
American models).
Inserting two R03 (size AAA)
batteries into the remote
With normal use, the batteries should last for about
six months. When the remote no longer operates
the system, replace both batteries with new ones.
Note
If you do not use the remote for a long period of
time, remove the batteries to avoid possible damage
from battery leakage.
Step 2: Setting the
time
You must set the time beforehand to use the
timer function.
1
Press CLOCK SET for a few
seconds, when the power is off.
appears.
2
Press ►►»I or ll«-<^ and set
the hour. "A" indicates AM and "P"
indicates PM.
3
Press CLOCK SET.
The minute indication flashes.
4
Press ►►»I or IK<-^ and set
the minute.
continued