Sony LBT-G1300 - Manual (Page 25)

Specifications
For the U.S. model
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
With 6 ohm loads, both channels driven, from
70 - 20,000 Hz; rated 32 watts per channel
minimum RMS power, with no more than 0.9
% total harmonic distortion from 250
milliwatts to rated output.
Amplifier section
Continuous RMS power output
40 + 40 watts
(6 ohms at 1 kHz,
10% THD)
Music power output (North American model only)
Tape player section
Recording system
Frequency resportse
75 + 75 W
Peak music power output (except for North
American model)
550W
Inputs PHONO: 4.4 mV
CXitpute PHONES (stereo phone
jack): accepts
headphones oi 8 ohms or
more.
SPEAKER: accepts
impedance of 6 to
16 ohms.
CD player section
System Compact disc and digital
Laser
audio system
Semiconductor laser
Laser output
(A.=780 - 790nm)
Emission duration:
continuous
Max. 400
r W
Frequency response
*Thk output is the value
measured at a dktance of
200 mm from the
objective lens surface on
the Optical Pick-up Block
with 7 mm aperture.
40 Hz-16 kHz (±0.5 dB)
Wow and flutter
4-track 2
60-13,000 Hz (±3dB),
using Sony TYPE I
cassette
0.1% WRMS ±0.3% (DIN)
Tuner section
FM stereo, FM/AM superheterodyne timer
FM tuner section
Tuning range
Aerial
Aerial terminals
Intermediate frequency
AM tuner section
Tuning range
Aerial
Intermediate frequency
Speaker
SS-G1300
Speaker system
Speaker units
Woofer;
Tweeter:
Nominal impedance
Dimensions:
Mass:
87.5 -108.0 MHz
FM wire aerial
75 ohm unbalanced
10.7 MHz
North American and
Mexican models: 530-
1,710kHz (with the
tuning interval set at
10 kHz)
Australian models; 531 -
1.602 kHz (with the
tuning interval set at
9 kHz)
Other modek: 531 -
1.602 kFlz (with the
tuning interval set at
9 kHz)
530 -1,710 kHz (with the
tuning interval set at
10 kHz) '
AM loop aerial
External aerial terminak
450 kHz
2-way, bass-reflex type
13 cm dia., cone type
2 cm dia., PIEZO type
8 ohms
Approx. 240
X 420 x
202 mm (9.5 x 16.5 x 8 in)
(w/h/d) incl. projecting
parts and controls
Approx. 3.1 kg (7 lb 1 oz)
net per speaker
continued