Canon 802.11g 54M WLAN - Manual (Page 9)

802.11g 4-Port Wireless LAN Broadband Router
9
2.2.4 Configure your computer
． Windows 95/98/ME
Step 1. TCP/IP Configuration
After you have completed the hardware setup by connecting your devices, you need to
configure your computer to connect to your Router.
1. From the Windows desktop, click the “Start” button and choose “Settings” ,
then click “Control Panel” .
2. From “Control Panel” , double-click the “Network” icon.
3. In the “Network” window, under the “Configuration” tab, double-click the “TCP/IP” entry
that is listed with your network card.
4. On the “Internet Protocol (TCP/IP) Properties” dialog box, make sure “Obtain an IP
address automatically” and “Obtain DNS server address automatically” are selected. If
not, select them and click “OK” and lose window.