Canon VendaFax VF-1 - Manual

VendaFax VF-1 Installation and Programming Guide
Corporate Headquarter: 16381 Cherokee Road Brooksville, Florida 34601 352-796-2693
Factory: 21B Squires Street Cortland, NY 13045 607-428-0627
Parts List:
1 – #980006-001 - VendaFax VF-2 controller – 1 Ea
2 – # 500040-002 - Velcro Strips – 2 Ea
3 – # 608783-020 - Wiring harness – 1 Ea
4 - # 608784-010 – Photo Sensor Harness, 10 Ft. – 1 Ea
5 - # 608784-007 – Telephone patch cord, 7 Ft. – 1 Ea
6 - # 300297 – 18/22 AWG splice connectors – 6 Ea
7 - # 100014 – 4” Ty Wrap – 2 Ea
Dimensions: 4.675”L x 2.805”W x 1.325”H
Shipping weight – 1 Lb.
Patent Pending
www.vendapin.com/vendafax.html
Mounting Guidelines
Your VendaFax module has been supplied with 2 velcro strips for easy mounting virtually anywhere.
Simply affix the Velcro strips to the back of the VendaFax module. Remove the backing paper on the
Velcro and install on the back of the module as shown below.