Canon 802.11g 54M WLAN - Manual (Page 7)

802.11g 4-Port Wireless LAN Broadband Router
7
2.2 Getting Started
Please refer to the following sections of this manual for additional information about setting
up a network.
2.2.1 System Requirement
Before you getting started, make sure that you meet the following requirements.
1. An Internet connection through a cable or DSL modem
2. A computer with an Ethernet network card
3. Your Windows CD, if your computer is running Windows 95, 98, or ME
4. UTP network cable with RJ-45 connector
5. Either Microsoft Internet Explorer 4.0 (or above version) or Netscape Navigator 4.0 (or
above version)
6. For Wireless Connection, you need Wireless LAN Card / USB Adapter.
2.2.2 Before Installation
Before you start to connect your router to any network device, make sure you get the
following values from your ISP. You will need those values to setup the Router and
configure you networked PCs to accept the IP address the Router chooses to assign them.
‧ PPPoE User Name and Password or Fixed Internet IP Address assigned by your local
ISP
‧ Your Subnet Mask
‧ Your Default Gateway
‧ Your Primary DNS IP address
You are supposed to have all those information mentioned above from your ISP. If not,
contact your ISP and they will be able to supply all the information you need.