Canon 802.11g 54M WLAN - Manual (Page 13)

802.11g 4-Port Wireless LAN Broadband Router
13
1. Open Internet Explorer and click the stop button. Click “Tools” then “Internet Options” .
2. In the “Internet Options” window click the “Connections” tab. Then click the “LAN
Settings” button.
3. Clear all the checkboxes.
4. Click “OK” , and then click “OK” again to close the “Internet Options” window.
‧ Netscape
1. Open Netscape and click the stop button. Click “Edit,” then click “Preferences…”
2. In the “Preferences” window, under “Category” double-click “Advanced” , then click
“Proxies”. Select “Direct connection to the Internet” . Click “OK”.
Step. 3 Obtain IP Settings from Your Router
1. From the Windows desktop, click the “Start” button, then “Programs“ , then “Accessories”
and then click “Command Prompt” .
2. Type “IPCONFIG /RELEASE” and press “Enter” .
3. Type “IPCONFIG /RENEW” and press “Enter”.
4. Verify that your IP address is now 192.168.1.xxx , your Subnet Mask is 255.255.255.0
and your Default Gateway is 192.168.1.1. Click “OK” to close the “IP Configuration”
window.
5. Type “Exit” and close window.
．MAC OS 7.X or above
Step 1. TCP/IP Configuration
1. Pull down the Apple Menu. Click “Control Panels” and select TCP/IP.
2. In the TCP/IP dialog box, make sure that “Ethernet” is selected in the “Connect Via.” field.
Make sure “Using DHCP Server” is already selected in the “Configure” field and close
window.