Playing back, Adjusting the lcd panel angle, When playing back in the dark – Sony CCD-CR1 User Manual

Page 20: To turn off the speaker

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Playing back

You c(1) Make sure that the power source is installed, (p. 8, 10)

(

)

While pressing the small button on the POWER switch, slide it in the direction

of the arrow. The small button lights up green.

(3) Press

to rewind the tape.

(4) Press ► to start playback.
You can also monitor the picture on a TV screen, after connecting the camcorder to a TV
or VCR.

Adjusting the LCD panel angle

Adjust the LCD panel to the angle you want.

When playing back in the dark
You may find it difficult to v iew the LCD screen in the dark. Wc recommend you to

moniti'r the playback picture on the LCD screen where there is more light.

To turn off the speaker

Slide the SPISAKId< ON/OI'l' switch to OI-F. I’o turn on the speaker, slide it to ON.