Pbx), To change a stored number, Making calls with speed dialing – Sony SPP-A400 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
• Do not allow more than 20 seconds to elapse between each step of the
procedure.
• When the battery pack in the handset is completely discharged or is removed
from the handset, the stored numbers will be erased.
Tips '
• If you enter a wrong number, press (PGM), then start from the beginning.
• Use the supplied directory to write down what you stored on the speed
dialing numbers.
To store a number to be dialed via Private Branch Exchange
(PBX)
Before entering a phone number in Step 4, do as follows:
1
Enter the outside line access digit (e.g., 9).
2
Press (REDIAL7PAUSE).
Notes
To change a stored number
Store a new number, as described on the previous page.
Making calls with speed dialing
1
Press (TALK) and wait until the TALK/BATT LOW lamp
lights up.
2
Press (SPEED DIAL).
3
Enter the desired speed dialing number ((]o) to CE))-
The phone number stored in the speed dialing number will
be dialed.
■o T o 3 (D ■n (D U (D Telephone Features 17®