Basics, Making calls – Sony SPP-A400 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Basics
Making calls
2
1
Pick up the handset from the
base unit.
3
4
Press (TALK) and wait until the
TALK/BATT LOW lamp lights
up.
You then hear a dial tone. If you
hear five short error beeps,
move closer to the base unit.
Dial the phone number.
When you're done talking, press
(OFF) or replace the handset on
the base unit.
The TALK/BATT LOW lamp
goes off.
Ш
fil
lA
S'
Additional tasks
To
Do this
Improve reception
Press (CHANNEL).
Adjust the handset volume
Slide VOL.
Switch to tone dialing temporarily
Press (♦TONE') after you're connected.
The line will remain in tone dialing until
disconnected.
Notes
• If the handset beeps every second during conversation, move closer to the
base unit; otherwise, the call will be disconnected after 15 seconds. Note
that, however, you may not hear beeps if it's noisy on the handset.
• Do not press C
channel
) when you're far from the base unit. The call may
be disconnected.
continued
Basics 13^"