Sony CDP-CE525 - Manual (Page 6)

Getting Started
Connecting Another CD Player
If you have a Sony CD player equipped with the
CONTROL A1 jack and the command mode of that
player can be set to CD 3, you can control that player as
the second player with this unit. After connecting this
unit and an amplifier, foUow the procedure below.
Be sure to turn off the power of each player before
making this connection.
COMMAND To LINE OUT
What cords will I need?
• Audio cord (1) (Use the cord supplied with the player to be
connected.)
• Monaural (2P) mini-plug cord (1) (not supplied)
1
Connect the players with an audio cord (see also
“Hookups" on page 5).
CDP-CE525 CDP-CX200, etc.
2
Connect the players with a monaural (2P) mini-
plug cord.
CDP-CE525 CDP-CX200, etc.
S-LINK
CONTROLAI
( control ai )
©
/
*v. >
For details on this connection, refer to the
supplementary “S-Link™/CONTROL-A1 Control
System" instructions.
3
Set the COMMAND MODE selector of each
player.
Set the COMMAND MODE selector of this player
to CD 1 or CD 2, and set that of the second player
to CDS.
COMMAND
MODE
For details on how to operate the second player,
see "Controlling Another CD Player" on page 18
and 'Tlaying Alternately" on page 20.