Checking the track order, Changing the track order, Playing discs of the second cd player – Sony CDP-CE525 User Manual
Page 18: Playing cds
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Playing CDs
Checking the track order
You can check your program before or after you start
playing.
Press CHECK.
Each time you press this button, the display shows the
track (the disc and track numbers) or the disc (the disc
number and "AL" indication) of each step in the
programmed order. After the last step in the program,
the display shows "END" and returns to the original
display. If you check the order after you start playing,
the display shows only the remaining steps.
Changing the track order
You can change your program before you start playing.
Controlling Another CD Player
(Advanced Mega Control)
This unit can control a second CD player (see
"Connecting Another CD Player" on pages 6 and 7).
Even when a second CD player is connected, the
controls on both of the units will function. When you
press the play button on either unit, the operating
player stops and the resting player starts.
Note that depending on the player, you may not be
able to operate all the functions of the second CD
player.
The controls indicated in the illustration below are effective
w'hile the MEGA CONTROL button is lit.
To
You need to
Erase a track
Press CHECK until the track
you don't want appears in
the display, then press
CLEAR
Erase the last track in the
program
Press CLEAR. Each time vou
press the button, the last
track w'ill be cleared.
Acid tracks to the end of the
program
Follow the programming
procedure
Erase the w'hole program -
completely
Hold down CLEAR until
"CLEAR" appears in the
displav. Create a new
program following the
programming procedure.
Play mode buttons (CONTINUE/
SHUFFLE/PROGRAM/REPEAT) t>
IKM
I I ■
(DISC)
t>C>i
Playing discs of the second CD player
1
Press MEGA CONTROL.
The MEGA CONTROL button lights up and the
display shows the current disc number of the
second player.
Current disc number
ALL DISCS
DISC
Select the pla
mode you want.
To program tracks, use the controls on the second
player.
Press O to start playing.
The play starts and the display shows the current
disc and track numbers and the playing time of the
track.
While the MEGA CONTROL button is lit, vou can
control the second plawr \\ ith the controls on this
player as follows:
18