Using an optical (digital) cable connection, Digital audio out (optical), Using an ex-link cable connection – Samsung 430 User Manual

Page 10: Connections, English

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Connections

Using

an Optical (Digital)

Cable

Connection

Available devices: Digital Audio System, Amplifier, DVD home theater

% DIGITAL AUDIO OUT (OPTICAL)

• When you connect a Digital Audio System to the DIGITAL AUDIO OUT (OPTICAL) Jack, decrease the volume

of both the TV and the system.

• 5,1 CH (channel) audio is available when you connect the TV to an external device supporting 5.1 CH.

• When the receiver (amplifier or DVD home theater) is set to on, you can hear sound output from the TV’s

optical jack. When the TV is receiving a DTV signal, the TV will send 5.1 CH sound to the amplifier or DVD
home theater. When the source is a digital component such as a DVD player / Blu-ray player / cable box / STB
(Set-Top-Box) satellite receiver and you connection it to the TV via HDMI, you will only 2 CH audio from fhe
amplifier or DVD home theater. If you want to hear 5.1 CH audio, connect the digital audio out jack from your

DVD / Blu-ray player / cable box / STB satellite receiver directly to an amplifier or home theater.

Using an EX-Link Cable Connection

Available Devices: External devices that support EX-Link

EX-LINK: Connector for service only.

English