Samsung HT-DS660T - Manual (Page 9)

Connecting the Video Out to TV
Depending on your TV, Component Video Input jacks may be marked as DVD Video Input.
Composite Video (Good Quality)
Connect the supplied video cable from the VIDEO OUT jack on the back panel of the system
to the VIDEO IN jack on your television.
S-Video (Better Quality)
If you television is equipped with an S-Video input, connect an S-Video cable (not supplied)
from the S-VIDEO OUT jack on the back panel of the system to the S-VIDEO IN jack on
your television.
Component Video (Best Quality)
If your television is equipped with Component Video inputs, connect a component video
cable (not supplied) from the Pr, Pb and Y jacks on the back panel of the system to the
corresponding jacks on your television.
When the Progressive scan mode is selected, the VIDEO and S-VIDEO outputs do not feed
any signal. See page 16 to select Progressive Scan.
P . S C A N ( P r o g r e s s i v e S c a n ) F u n c t i O f l
Unlike regular interlace Scan, in which two fields of picture information alternate to create the
entire picture (odd scan lines, then even scan lines), Progressive Scan uses one field of
information (all lines displayed in one pass) to create a clear and detaiied picture without visible
scan lines.
Press and hold P.SCAN button on the remote control for over 5 seconds in stop
mode.
• Pressing and holding the button for over 5 seconds will select "Progressive Scan" and "Interlace Scan"
repetitively.
(or Sëi&hhirtiïf
o
o
o
=H
O
c/>
Interlaced Scan (1 FRAME = 2 FIELDS)
In interlaced-scan video, a frame consists of two
interlaced fields (odd and even), where each field
contains every other horizontal line in the frame.
The odd field of alternating lines is displayed first, and
then the even field is displayed to fill in the alternating
gaps left by the odd field to form a single frame.
One frame, displayed every 1/30th of a second, contains
two interfaced fields, thus a total of 60 fields are
displayed every 1/60th of a second.
The interlaced scanning method is intended for capturing
a still object.
Progressive Scan (FULL FRAME)
The progressive scanning method scans one full frame of
video consecutively down the screen, line by line.
An entire image is drawn at one time, as opposed to the
interlaced scanning process by which a video image is
drawn in a series of passes.
The progressive scanning method is desirable for dealing
with moving objects.
This function works only on TVs equipped with component video inputs (Y, Pr, Pb) that support
Progressive Video. (It does network on TVs with conventional component inputs, i.e.,
non-progressive scan TVs.)
Depending on the brand and model of your TV, this function may not work..
Broadcast System
This device is designed to work with the NTSC video format.
For normal playback, the video format a DVD disc is recorded in
must coincide with your TV's video format.