Samsung HT-DS660T - Manual (Page 11)

How to Connect to Anynet
' Using the Anynet function, the DVD Home Theater System can be conveniently controiled from
your Samsung TV. By connecting the Anynet output terminal on the DVD Home Theater
System to the input terminal of any Samsung Anynet-enabled device, both can be controlled
from your TV. For detailed operation Instructions and connection diagram, refer to the user’s
manual of your Anynet-enabled TV.
What is Anynet?
• The Anynet function allows you to use your TV’s remote control and menu to control ali AV devices.
• However, this function is available only with Samsung Anynet-enabled models.
“I Connect the Anynet input terminal on the back of this unit to your Samsung TV's Anynet
output terminal.
2 Connect the Anynet Out Terminal on the back of this unit to the Anynet input of Samsung
external AV devices.
3
Refer to the user’s manual of your Anynet-enabled TV and activate the Anynet function.
* This function is available only with Anynet-enabled TVs.
Caution
If the Anynet input and output terminals are reversed, communication with the TV will fail and
you will not be able to use the Anynet function.
Connecting the FM and AM Antennas
If AM reception is poor, connect an
outdoor AM antenna(not supplied).
AM Loop Antenna
(supplied)
O
o
o
=H
o
c/>
Snap the tabs on the loop into the
slots of the base to assemble the
AM loop antenna.
edhiii#tidii
1. Connect the FM antenna supplied to the FM 75Q
COAXIAL terminal as a temporary measure.
2. Slowly move the antenna wire around until you
find a location where reception is good, then
fasten it to a wall or other rigid surface.
• If reception is poor, connect an outdoor antenna.
Before attaching a 75fl coaxial cable (with a standard
type connector), disconnect the supplied FM antenna.
I! AM ihffehii ^ jildti
1. Connect the AM loop antenna supplied
to the AM and rh terminals.
2. If reception is poor, connect an outdoor
single vinyl-covered wire to the AM
terminal. (Keep the AM loop antenna
connected).
Cooling Fan
The cooling fan dissipates the heat generated inside the unit so that the unit can be operated
normally. The cooling fan is activated automatically to supply cool air to the unit.
Please observe the following cautions for your safety.
* Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit could rise
and may damage it.
• Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered with a
newspaper or cloth, heat may build up inside the unit and fire may result.)