Sony STR-V220 - Manual (Page 9)

Receiver Operations
Selecting a Component
To listen to or watch a connected component, first
select the function on the receiver or with the remote.
Before you begin, make sure you have:
• Connected all components securely and correctly as
indicated on pages 4 to 8.
• Turned MASTER VOLUME to the leftmost position
(0) tcTavoid damaging your speakers.
Function buttons
1
Press
1/(1)
to turn on the receiver.
2
Press one of the function buttons to select the
component you want to use:
To watch or listen to Press
Video tapes VIDEO
TV programs TV/SAT
Audio tapes or MiniDiscs (MD) TAPE/MD
Compact Discs (CD) CD
Radio programs TUNER
Note
The PHONO button on the remote does not operate.
Turn on the component, for example, a CD player,
and then start playing.
To tune in radio stations on this receiver, see
"Receiving Broadcasts" on page 11.
To Do this
Mute the sound j Press MUTING on the remote.
Press again to restore the sound.
Reinforce the bass
[X]
Press BASS BOOST on the remote
to turn on the BASS BOOST
indicator
Adjust the balance of
front speakers Turn BALANCE left or right
Adjust the tone quality Turn BASS or TREBLE
Q' When you listen with headphones
Connect the headphones to the PHONES jack.
Playing the audio portion of TV/video
programs
To enjoy Do this
TV programs Turn on both the TV and the receiver
and press TV/SAT
Videos 1 Press VIDEO to select the VCR.
2 Turn on the TV and set the TV's
video input to match your video
component,
3 Turn on the VCR and start
playback.
'Q* When you watch TV or video programs
We recommend you play audio portion through the
receiver instead of your TV's speakers. This lets you
take advantage of the receiver's surround sound effects,
like Dolby Pro Logic Surround, and lets you use the
receiver's remote to control the audio.
Turn off the speakers on your TV before you start so
you can enjoy the surround sound from your receiver.
Turn MASTER VOLUME to adjust the volume.
To adjust the volume of the TV's speakers, use the
volume control on the TV.