Remote button descriptions, Note, Additional information – Sony STR-V220 User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Additional Information
Remote Button Descriptions
Refer to the table below for an explanation of remote buttons not described on previous pages or for remote buttons
without a corresponding button on the main unit.
Remote
Button
Operates
Function
0-9, >10
Receiver
Selects preset numbers
CD player/MD Selects track numbers,
deck 0 selects track 10.
TV/VCR
Selects channel numbers
CH/PRESET
+/-
Receiver
Scans and selects preset
stations
TV/VCR
Selects preset channels
DISC
CD player
Selects discs (CD player
with multi-disc changer
only)
D, SKIP
CD player
Skips discs (CD player with
multi-disc changer only)
CD player
Searches tracks (forward or
backward)
Tapedeck/MD Fast forwards or rewinds
deck/VCR
«◄/►►I
CD player/
MD deck
Skips tracks
II
CD player/
Tape deck/
MD deck/
VCR
Pauses play or record (also
starts recording with
components in record
standby)
►
CD player/
Tape deck/MD
deck/VCR
Starts play
■
CD player/
Tape deck/MD
deck/VCR
Stops play
Tape deck
Starts play on the reverse
side
•
Tape deck
Sets tape deck to the record
standby mode
Tape deck/MD Starts recording when
deck/VCR pressed with ► (or ^ on
tape deck)
Remote
Button
Operates
Function
ENTER
TV/VCR/
Satellite tuner/
CD player
Changes channels/discs
when used with 0-9
VISUAL 1/(1)
TV/VCR/
Satellite tuner
Turns on or off the power
TV CONTROL
TV
Turns on the TV, switches
the input to "TV," and sets
the remote to operate the TV
POSITION
TV
Changes the position of the
small picture^
SWAP
TV
Swaps the small and the
large picture’*'
PINP
TV
Activates the picture-in-
picture function’*'
JUMP
TV
Jumps back and forth
between the previous and
current channels
ANTTV/VTR
VCR
Selects output signal from
the anterma terminal; TV
signal or VCR program
MASTER VOL
+/-
TV
Normally, adjusts the
master volume of the
receiver.
If TV CONTROL was
pressed, it adjusts the
volume on the TV,
MUTING
TV
Normally, mutes the sound
from the receiver.
If TV CONTROL was
pressed, the sound on the
'TV itself is muted.
5.1 INPUT
—
Not applicable
—
Not applicable
Only for Sony TVs with the picture-in-picture function
Note
The PHONO button on the remote does not operate.
22