Note, Selecting the center mode – Sony STR-V220 User Manual

Page 15

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Receiver Operations

*Q* You can find Dolby Surround-encoded software by

looking at the packaging

However, some videos and laser discs may use Dolby

Surround sound even if it's not indicated on the

package.

Adjusting the effect level (MOVIE and HALL
mo.de only)

You can boost the surround sound by increasing the
effect level. The surround effect can be six different
levels (steps 1 to 6).

Start playing the program source.

Press EFFECT DELAY TIME repeatedly to select

the effect level you want.
The effect level ("EFFECT 1" to "EFFECT 6")
appears in the display.

Note

Depending on the playback source, changing the effect level

may not produce significant variations in the reproduced

sound.

Getting the Most out of Dolby
Pro Logic Surround Sound

To obtain the best possible Dolby Pro Logic Surround
sound, first select the center mode according to your
speaker system. Then, adjust the volume of each
speaker and delay time.

Note that you must have at least one additional pair of
speakers and/or one center speaker to do the following
adjustments.

SURROUND MODE MASTER VOLUME

Selecting the center mode

The receiver offers you four center modes:

PHANTOM, 3 STEREO, NORMAL, and WIDE. Each
mode is designed for a different speaker configuration.
Select the mode that best suits your speaker system
configuration.

Press SURROUND ON/OFF to turn on the

surround sound.

Press SURROUND MODE repeatedly to select the

PRO LOGIC or MOVIE mode.