Sony XV-T33 - Manual (Page 7)

Before You Begin Trying Out the Titler
Before using the titier. check the connections and
prepare the player and the recorder as foiiows:
Connection
Check that the player and the recorder are
connected to the litier. if not, refer to page tO.
Player
• insert the onginaliy recorded tape.
• Wherr the player has an input/outpuf selector for
the audio/video jacks, set it to ON (or output).
• Set the power switch to VTR (PLAYER) (or ON).
Recorder
• Insert a tape (or recordirtg. Check that the
safety tab is not in the preventive position.
• Set the input selector to LINE IN.
• Make the necessary settings lot recording such
as recording mode, recording level, etc. See the
operating instructions of the recorder for details.
To demonstrate the titler's most basic operations,
this section shows how to create a simple title and
add the title to a video picture. It is helpful tor
begtrmers who want to start using the tiller tight
away. For details about the basic operations
demonstrated in this section, see "Basic
Operations' on page 20. More advanced
operations are detailed in “Advanced Operations'
on page 31.
The Procedure for Making a Video Picture with a Title
The procedure for making a video picture with a
title is as follows:
Record a videotape with your video camera
recorder (or other VCR).
Create a title for the video picture you have
prepared using the titler.
Add the title you have created onto the tape,
and record the tape with the title onto a new
tape or a tape you are editing.
12 13