Sony SA-VA500 - Manual (Page 7)

Getting Started
1 Use an optional CONTROL S cord to connect the
CONTROL S TV IN jack on the left front speaker to
the CONTROL S OUT jack on the back of the TV.
XBR' series TV set or
Projection TV Front speaker (left)
------mnffglrnin'
(Sold separately)
2 Follow the Operating instructions supplied with
vour TV set to set it to operate this speaker system.
STEPS Connecting the AC power cord
Connect the AC power cord from the front speaker to a
wall outlet.
Connecting Other Components
With its built-in amplifier, fhis .speaker system can be
used to output sound directly from such components
as CD players, DVD (2-channel) players, LD players,
and VCRs.
CD player, DVD player.
Do not connect an amplified audio source. The combined
amplification from the component and the speaker's built-in
amplifier may damage the speakers.
Hooking Up the Speaker
System 5.1-channel Input
This speaker system is equipped with the 5.1-channel
input (5.1 CH INPUT) jacks. By connecting your DVD
player or other digital \'ideo source through a multi­
channel decoder (e.g., Dolby Digital (AC-3) decoder,
DTS decoder) to these jacks, you can enjoy theater-
cjuality Multi-Channel Surround sound in your own
home. Refer to the instruction manual supplied with
your Dolby Digital (AC-3) decoder etc., for details on
the 5.1-channel input hookups.
Audio cords (not supplied)
Two for the 5.1 CH INPUT FRONT and REAR jacks
White (L)
Red (R)
White (L)
Red (R)
Monaural audio cords (not supplied)
Two for the 5.1 CH INPUT CENTER and WOOFER jacks
Black c=Cg]ir3=
=cnE3= Black
DVD player
Incorporating
Dolby Digital (AC-3)
It is possible to use a pair of audio cords instead of two
monaural audio cords to connect to the 5.1 CH INPUT
CENTER and 5.1 CH INPUT WOOFER jacks.
(Continued)
7