Sony SA-VA500 - Manual (Page 6)

Getting Started
STEPS Connecting the rear speakers
Use the supplied 32-foot-9 V i inch (10 m) speaker
cords to connect the left and right rear speakers.
Insert the stripped wires into the speaker terminals.
Rear speaker
(right)
Rear speaker
(left)
Be sure to connect matching speaker terminals (e g., use the
solid-color wire to connect + to +, and use the striped wire to
connect - to -). If the connections are reversed (+ to -), the
sound will lack bass.
For customers in Canada
Use only the supplied SS-TIOO Satellite Speakers for
connection to the CENTER SPEAKER terminal and REAR
SPEAKERS terminal of SAVA-700.
Use only the supplied SS-CN16 Center Speaker for
connection to the CENTER SPEAKER terminal of SAVA-500
and SS-SR16 Rear Speakers for connection to the REAR
SPEAKERS terminal of SAVA-500.
STEP 4 Connecting your TV
Use the supplied a pair of audio connecting cords to
connect the TV IN jacks on the left front speaker to the
AUDIO OUT jacks on your TV.
Important
If your TV set has an on/off switch for its internal speaker,
set this to off, and enjoy the sound of this speaker system. If
your TV set does not, set the volume on your TV set to
minimum.
If you use AUDIO OUT jacks marked VARIABLE
Affer making the connection as shown above, turn up
the volume on the TV set. Use this speaker system's
volume control for regular volume adjustment.
Turning down the volume on the TV set reduces the
AUDIO OUT signal level and ma\ cause a loss in
sound quality and/or activate the auto-power on/off
function (seepage 9).
Connecting the SCART adaptor (European model
only)
You can listen to the sound from the TV or VCR by
connecting the audio signal from the TV or VCR to the
left front speaker.
Front speaker
If you have a Sony XBR^ series TV or Sony Projection
TV equipped with a speaker switch
(For U.S. and Canadian customers only)
ff your Sony XBR- series TV set or Projection TV is
compatible with SAVA series speakers, you can use the
TV set's menu and remote control functions to operate
this speaker system.
For details, see the Operating Instructions supplied
with your TV set.
Be sure to connect the TV IN jacks on the left front
speaker to the TV set's FIXED AUDIO OUTPUT jacks if
you make this connection.