Sony MZ-R55 - Manual (Page 35)

Error message Meaning/Remedy
NO COPY • You tried to make a copy from a disc that is protected by the Serial
Copy Management System. You cannot make copies from a
digitally connected source which was itself recorded using digital
connection.
♦ Use analog connection instead (page 6).
NO DISC • You tried to play or record with no disc in the recorder.
^ Insert an MD.
NO SIGNAL • The recorder could not detect digital input signals.
♦ Make sure that the source is connected firmly (page 11).
P/B ONLY •You tried to record or edit on a premastered MD (P/B stands for
“playback”.)
Insert a recordable MD.
PROTECTED • You tried to record or edit on a MD with the tab in the record-
protect position.
Slide the tab back (page 30).
SORRY • You tried to erase the track mark at the beginning of the first track.
• You tried to erase a track mark to combine tracks the recorder
cannot combine (a track recorded in stereo and in mono, for
example).
• You tired to press DIGITAL MEGA BASS when the LINE OUT jack
is plugged in.
• You tried to press II or T MARK during synchro-recording.
TEMP OVER • Heat has built up in the recorder.
Let the recorder cool down.
TR FULL • There is no more space for new data when you are editing the MD.
■ ^ Erase unnecessary tracks (page 21).
TrPROTECT • You tried to record or edit on a track that is protected from erasing.
Record or edit on other tracks.
EDITING • You pressed a key on the recorder while editing on the remote
control, or vice versa.
35