Sony MZ-R55 - Manual (Page 25)

To label a track, press EDIT/ENTER
again.
To label a disc, press or
repeatedly until ”
: Name”
flashes in the display, then press
EDIT/ENTER.
3
Follow steps 4 to 6 of ’’Labeling a disc
during stop” above.
To cancel labeling, press M or T MARK.
Note
When the recording is stopped while
labeling a track or a disc during
recording, or when the playback moves
on to the next track while labeling a track,
the input at that point is entered
automatically.
TRACK
MARK
On the remote control
DISPLAY
PLAY MODE
I I
Control
VOL +/-
Labeling a disc during stop
1
Insert a disc.
To label a disc that is already in the
recorder, press ■ to stop.
2 Press DISPLAY for 2 seconds or
more.
” : Name” flashes in the display.
3
Press ■.
The disc is ready to be labeled.
4
Turn the control to select a letter and
press ■ to enter.
The selected letter stops flashing and
the cursor moves to the next input
position.
Press/ Turn To
I I Switch between capital
letters, small letters, and
marks / numbers.
VOL +/- Move the cursor to the
left or right.
Change the letter to the
one before / next one.
DISPLAY ' Insert a blank space to
type in a new letter.
PLAY MODE Delete a letter and move
back all following letters
to the left.
TRACK MARK Cancel labeling.
continued
25