Sony DVP-S550D - Manual (Page 55)

standard Code number
Austria 2046
Belgium 2057
Canada 2079
China 2092
Denmark 2115
Finland 2165
France 2174
Germanv 2109
Hong Kong 2219
Indonesia 223S
Itaiv 2254
Japan 2276
Malaysia 2363
Netherlands 2376
Norway 2379
idiiiippincs 2424
RusMan 24-So
Singapore 2501
Spain 214^
Sweden 2499
Switzerland 208o
Taiwan 25-13
Thailand 2528
united Kingdom 2184
Settings for Sound (AUDIO
SETUP)
Select "AUDIO SETUP" after pressing SET UP.
"AUDIO SETUP" allows you to set the sound according
to tlie playback conditions.
Default settings are underlined.
AUDIO SETUP
AUDIO ATT: OFF
AUDIO FILTER: SHARP
AUDIO DRC: STANDARD
TRACK SELECTION: OFF
DOWN M I X : DOLBY SURROUND
DIGITAL OUT: ON
DOLBY DIGITAL: D-PCM
DTS: OFF
To set, press SBfliS, then (M i I r ] .
To quit, pre.s.s fsiTuPl.___________
■AUDIO ATT (attenuation)
Selects the setting of the output from the LINE OUT
(AUDIO 1, 2) and 5.1 OUTPUT connectors according to
the audio equipment to be connected.
• OFF: turns off the audio attenuation.
• ON: reduces the audio output level so that no sound
distortion occurs.
Note
The setting does not affect the output from the DIGITAL OlfT
Ot’TIC.AL and COAXIAL connectors.
■AUDIO FILTER
Selects the type of digital filter to reduce the noi.se of a
frequency higher than 22,05kEiz (fs 44.1kHz), 24kHz (Is
48kHz) or 48kHz (fs 96kHz).
• SHARP: makes the sound clear and provides smooth
sound reproduction. Normally set this position.
• SLOW: makes the sound warm and deep.
(/1
n
3
IQ
V)
fij
3
a
>
a
Note
Depending on the disc, the effect on the sound may be difficult to
hear.
55