Operating from an outside phone, Notes, Setting the remote id code (security code) – Sony SPP-A967 User Manual
Page 18: To change the remote id code (security code)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
![background image](/manuals/629547/18/background.png)
Recording a memo
You can record a "memo" (up to four minutes) as a personal reminder
or as a message for other people. You can play back the recorded
memo like any incoming messages (see page 32).
Operating from an outside phone
You can call from a touch-tone phime and pick up new messages
recorded on the phone. First, you jusl set lire jemoie it) code (seci
code) and turn on the answering function before going out.
1
Press ( MEMO~),
You hear a voice guide.
2
Select a mailbox by paressing
CMAILBOX 1 ), ( MAILBOX 2) or
C
mailbox
3). You will hear a
voice guide, then a long
confirmation beep.
3
After the tone, start recording.
Speak about 12 inches (30 cm)
away from the microphone.
Press (MEMO) to stop) recording.
The message number in the
dispalay increases by one.
Notes
• If you press (MEMO) when the memeirv is full ("F" flashing on the displac),
\'OLi hear h\ e short error beeps and \ ou cannot record a memo.
• It a call comes in or (JAL^ is pressed wlhle recording a memo, rectirding is
canceled. Start over the procedure.
• It the remaining memor\' becomes full while recording, rect'rding stops
autkMnaticalK' and "F" flashes on the d\spla\'.
Tip
If four minutes ha\ e passed in h>tep 3, recording stop.^ autt.>maticall\-, and the
recorded memo is counted as a new message.
Setting the remote ID code (security code)
1
2
Press rsET/REC).
—3
Press (ANSWER ON/OFF).
You hear a voice guide:
"Please set the security code. To
select, press the SKIP or
REPEAT button. To enter, press
the SET button."
Set a two-digit number between
00 and 99 by pressing (
skip
/
QUICK) or (REPEAT/SLOW).
Press (SKIP/QUICK) to increase a
number, or
(
repeat
/
slow
) to
decrease.
Each time you press (SKIP/
QUICK) or (REPEAT/SLQW), the
p>hone announces a number.
Press (SET/REC).
The remote ID code (security
code) is set, and you hear a long
confirmation beep.
To change the remote ID code (security code)
Enter a new remote ID code (security code). The neu code will replace
the old one.
continued
34"'
Answering Machine Features
Answering Machine Features