Sony CDP-XA7ES - Manual (Page 20)

20
I
Storing Information About CDs (Custom Files)
when you've already decided where to index
You can directly mark an index without adjusting the
point. When you find the point to be indexed, first press
II to pause playing and press FILE to mark an index. (For
CDP-XA7ES, use the remote.)
Playing from an indexed point
(Custom Index Play)
1
Press PLAY MODE repeatedly until "CUSTOM
INDEX" appears in the display.
When using the remote, press C.INDEX.
2
Locate the Custom Index you want as follows:
To locate Press
The next Custom Index [J] INDEX—fc-
The current Custom Index INDEX--—
A specific Custom Index Number button of the
directly Custom Index
By scanning the indexed
points for 10 seconds [J] MUSIC SCAN. When you
find the point you want,
press ► to start playing.
Playback starts from the selected Custom Index to
the end of the disc.
To cancel the Custom Index Play
Press PLAY MODE twice (or CONTINUE on the remote).
Notes
• You cannot use the index search function (see page 11).
• Use INDEX ^ buttons to locate the next or the
current Custom Indexes, instead of ll«/»ll buttons.
Playing from one index to the next one (Custom Index
Single Play)
1 Press PLAY MODE repeatedly until "CUSTOM INDEX
(1)" appears in the display.
When using the remote, press C.INDEX.
2 Press the number button of the Custom Index you want.
Playback starts from the selected Custom Index and
stops at the beginning of the next index.
To cancel the Custom Index Single Play, press PLAY MODE
once (or CONTINUE on the remote).
y' You can play the portion between two indexes
repeatedly
Press REPEAT. (For CDP-XA7ES, use the remote.)
Erasing the Custom index
1
Insert the disc.
Press PLAY MODE repeatedly until "CUSTOM
INDEX" appears in the display.
When using the remote, press C.INDEX.
3
4
Press CHECK repeatedly until the Custom Index
number you want to erase flashes.
Press ERASE while the number is flashing to erase
the Custom Index. (For CDP-XA7ES, use the
remote.)
The succeeding Custom Index numbers decrease
by one.
Storing Specific Tracks of a
Disc (Delete Bank)
You can delete unwanted tracks and store only the
tracks you want. You can start playing your favorite
tracks without deleting tracks each time.
1
2
Insert the disc.
Delete tracks you don't want.
Follow Steps 1 to 3 in "Playing Only Specific
Tracks" on page 14.
Press FILE to store the remaining tracks. (For
CDP-XA7ES, use the remote.)
"DELETE" in the Custom File indication lights up
in the display.