Sony CDP-XA7ES - Manual (Page 11)

Playing CDs
Locating a Specific Track
You can quickly locate any track while playing a disc
using the IKK/1»! (AMS: Automatic Music Sensor)
buttons or number buttons.
Number
buttons '
>20
-
CD
CD CD
CD CD CDS
a a a a n
CD CD CD CD CD
' CUCDCDCDCD
i — II — II—II—II— 1
CD CD
CD
CD CD CD CD
CD
CD
OD OD CD
■p5JUj«i|rsnn=n 1 _1
CD
MUSIC SCAN
To locate Press
The next or »1 repeatedly until you find the
succeeding tracks track
The current or IKK) repeatedly until you find the
preceding tracks track
A specific track
directly Number button of the track
By scanning each
track for 10 seconds
(Music Scan) MUSIC SCAN before you start playing
or while playing a disc. When you find
the track you want, press ► to start
playing.
When you directly locate a track numbered over 12
(or 20 when using the remote)
Press >12 (or >20 on the remote) first, then the
corresponding number buttons. To enter "0," use button
10 .
Example: To play track number 30
Press >12 (or >20 on the remote) first, then 3
and 10.
You can extend the playing time during Music Scan [J]
Press MUSIC SCAN repeatedly until the playing time
you want (10,20 or 30) appears in the display. Each time
you press the button, the playing time changes cyclically.
Locating a Particular Point in a
Track
You can also locate a particular point in a track while
playing a disc.
index
CDl CD
CD CD CD CD CD
CD CD CD CD CD
CD CD CD CD CD
CD CD CD CD CD
CD CD CD CD CD
SLOW
To locate a point Press
While monitoring the
sound ►► (forward) or (backward)
and hold down until you find the
point
Slowly by monitoring
the sound jjj SLOW on the remote and
hold down until you find the point
Quickly by observing
the display during
pause and hold down until you
find the point. You will not hear the
sound during the operation.
Using an index (only
for indexed discs)
m
INDEX ^.... /' ^ on the remote
repeatedly until you find the point
What is an index?
It is a number that divides a track or a disc into sections,
enabling you to easily locate a desired point. You can
determine if a disc uses indexes by its packaging.
Note
If" ”/ —/ " appears in the display, the disc has reached the end
while you were pressing Press ◄◄ or IKK to go back.
11