To obtain the best speakerphone performance, Notes, To erase the last phone number dialed – Sony IT-M202 User Manual
Page 14: Redialing
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Making calls (continued)
To obtain the best speakerphone performance
• You may not be able to hear the other party's voice in a noisy place. Therefore, use
the speakerphone in a quiet room.
• Do not bring your hand or other objects too close to the microphone or you will
hear a shrill noise ("feedback").
• When the speaker volume is loud, or the telephone has been placed close to a wall,
you may find that the volume drops suddenly. This is due to a circuit in the
telephone designed to protect against feedback. In such cases, lower the speaker
volume slightly.
Redialing
1
Pick
up the handset (or press (SPEAKERPHONE)).
Press (
LINE 1) or (LINE 2)
to select the line, if necessary.
The corresponding line button lights up.
Z Press (
REDIAL/PAUSE
) to redial the last number dialed.
The last number dialed is automatically redialed.
Notes
• The last number dialed cannot be stored separately for each line. It is the very
last one you have dialed using either line.
• You will hear five short error beeps if the last number dialed exceeds 32
digits or if it is erased.
To erase the last phone number dialed
while the phone is not in use, press (REDIAL/PAUSE) twice within 20 seconds.
The number will be erased from the memory.
Basics