Sony DHC-MD500 User Manual
Mini hi-fi component system
Table of contents
Document Outline
- soNTi?:
- ©1998 by Sony Corporation
- To prevent fire or shock hazard, do not expose the unit to rain or moisture.
- Table of Contents
- Step 1: Hooking up the system
- Step 2: Setting the time
- 1 2,4 3,5
- Step 3: Presetting radio stations
- Connecting optional -M/ components
- Playing a CD
- Recording a CD
- Listening to the radio
- Recording from the radio
- Playing a tape
- Recording from a tape
- Using the CD display
- Playing the CD tracks repeatedly
- Playing the CD tracks in random order
- Programming the CD tracks
- Playing CDs without interruption
- Recording on a tape Irnanually
- Recording a CD by .specifying track order
- Looping part of a CD
- Flashing part of a CD
- Adjusting the sound
- Selecting the audio emphasis
- Selecting the surround effect
- Using the Radio Data System (RDS)
- Singing along: Karaoke
- Falling asleep to №usic
- Waking up to music
- 4,5,6,7,8
- 1 Prepare the music source you want to play.
- 2 Adjust the volume.
- 3 Press CLOCK/TIMER SET.
- 4 Turn jog dial to select DAILY 1 or 2, then press ENTER/ NEXT.
- 5 Set the time to start playback.
- 6 Set the time to stop playback following the above procedure.
- 7 Turn jog dial until the music source you want appears.
- 8 Press ENTER/NEXT.
- 9 Turn off the power.
- To cancel the timer operation
- Timer-recording radio programs
- 1 Tune in the preset radio station (see "Listening to the radio").
- 2 Press CLOCK/TIMER SET.
- 3 Turn jog dial to select "REC", then press ENTER/NEXT.
- Set the time to stop recording following the above procedure.
- 6 Insert a recordable tape.
- 7 Turn off the power.
- To check the setting
- To cancel the timer operation
- Precautions
- Troubleshooting
- The sound from the connected source is distorted.
- The timer does not function.
- The remote does not function.
- There is acoustic feedback.
- Sound comes from one channel or unbalanced left and right volume.
- Sound lacks bass.
- The CD tray does not close.
- If other troubles not described above occur, reset the system as follows;
- Specifications
- Index