1 prepare the music source you want to play, 2 adjust the volume, 3 press clock/timer set – Sony DHC-MD500 User Manual
Page 37: 5 set the time to start playback, 8 press enter/next, 9 turn off the power
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1
Prepare the music source you want
to play.
• CD: Insert a CD. To start from a
specific track, make a program (see
"Programming the CD tracks").
• Tape: Insert an tape with the side you
want to play facing forward.
• Radio: Tune in the preset station you
want (see "Step 3: Presetting radio
stations").
2
Adjust the volume.
3
Press CLOCK/TIMER SET.
"SET (DAILY 1)" appears.
4
Turn jog dial to select DAILY 1 or 2,
then press ENTER/ NEXT.
"ON" appears and the hour digits flash
in the display.
5
Set the time to start playback.
Turn jog dial to set the hour, then press
ENTER/NEXT.
The minute indication starts flashing.
Turn jog dial to set the minute, then
press ENTER/NEXT.
The hour indication flashes again.
6
Set the time to stop playback
following the above procedure.
7
Turn jog dial until the music source
you want appears.
The indications change as follows:
I—► TUNER ^ CD PLAY •.-- ,
I---------► TAPE PLAY 1------- 1
8
Press ENTER/NEXT.
The type of timer (DAILY 1 or DAILY 2)
followed by the .start time, stop time and
the music source, appears, then the
original display appears.
9
Turn off the power.