Sony DHC-MD500 - Manual (Page 29)

Sound Adjustment
Adjusting the sound
You can reinforce the bass, create a more
powerful sound, and listen with headphones.
Notes
• With some songs, the music will sound distorted
when you use the DBFB system with the graphic
equalizer if the bass is too strong. Adjust the bass
slowly while listening to music so that you can
monitor the effect of the adjustment.
• Cancelling GROOVE sets DBFB to "DBFB "
and flattens the equalizer curve. To cancel the
DBFB level, press DBFB until the indication
disappears. Adjust the equalization to obtain the
effect you desire.
To listen through the headphones
Connect the headphones to PHONES jack. N.
sound will come from the speakers.
Note
(except for European model)
If you have connected a super woofer, please note
that sound comes from the super woofer even whoi
the headphones are connected. Turn off the poi' cr
of the super woofer when using headphones.
To reinforce bass (DBFB)
Press DBFB*.
Every time you press the button, the display
changes as follows:
► DBFB NORMAL (DBFB a\\)
4.
DBFB HIGH (DBFB a\\\\\)
4-
L DBFB OFF (off)
DBFB = Dynamic Bass Feedback
For a powerful sound (GROOVE)
Press GROOVE. The volume switches to
power mode, DBFB is automatically set to
full strength, the equalizer curve changes,
and the "GROOVE" button lights up. Press
GROOVE again to return to the previous
volume.