Two Brothers Racing Suzuki GSX-R650F - Manual (Page 3)

ITBR001-194 2008-09 Suzuki GSX-650F - 3
Fi
gu
re
A
Fi
gur
e B
Fi
gu
re
C
Juice Box Pro
harness
Juice Box Pro
harness
unplug
unplug
The ignition must be turned OFF before installation.
1 Remove the seat and left hand side cover.
2 Remove the fuel tank.
3 Lay the Juice Box Pro in the tail section.
4 Route the wiring harness from the Juice Box Pro under the frame crossover and
towards the engine along the right hand side of the air box as shown in Figure A.
5 Unplug the stock wiring harness from each of the injectors as shown in Figure B.
6 Attach the connectors from the Juice Box Pro to the stock injectors and the stock
wiring harness as shown in Figure C.
• blue wire connects to cylinder #1
• green wire connects to cylinder #2
• yellow wire connects to cylinder #3
• orange wire connects to cylinder #4