Taylor-Wharton LABS Series - Manual (Page 6)

4
LABS
GENERAL INFORMATION
This state-of-the-art Cryogenic System can be used in either the liquid or vapor
phase. Units are supplied with Taylor-Wharton approved controllers. If other
liquid level controllers are used, please contact Taylor-Wharton before putting the
refrigerator into service.
Taylor-Wharton LABS Cryostorage Systems are designed for applications where
extremely low temperature storage of biological products is required. They are also
appropriate for industrial or other applications where liquid nitrogen temperatures
and high capacity are needed.
The LABS style refrigerator covered by this publication is designed for, but not limited
to, the laboratory environment. Each model is supplied with locking casters to
enable limited mobility for cleaning and positioning purposes.
The standard model is also equipped with a Taylor-Wharton approved electronic
liquid level controller that will help monitor and control the supply of liquid nitrogen
to the unit. Make sure to read the operating and saftey instructions provided with
the controller you have selected to use with your LABS unit. The addition of a liquid
nitrogen supply and inventory control racks for systematic retrieval of stored product
completes the total Cryostorage System.
Hinged and Lockable Lid
Battery Back Up Flat Table Top
Pivoting Controller
Controller
Electronics
Solenoid
Valve
Turntable
Pivot Point
with Easy Grip
Vacuum
and Super
Insulation
Locking Wheel
Casters
Low
Temperature
Storage Area
Ergonomic
Folding and
Locking Step
Non-Bearing
Carousel
High Density
Foam Plug with
Sealed Coating
Ergonomic
Lid Handle
Figure 3.0 LABS 80K
TW-LABS-Manual-Digital-TOC-BlackandWhite.indd 4 8/1/12 11:36 PM