Roadi Turbo Gauge - Manual (Page 22)

20
8.6 Display (Home>> >> Display)
1). Press the lower-left button from home screen doubly.
SPEED DISPLAY
ABOUT DEFAULT
MODE HOME
CONTRAST
2). Press the button next to DISPLAY.
A. Enter Mode Menu
1).To change the display mode of tri p items, press the button next to
MODE.
2). Use the button next to “-” or “+” to adjust in 1KPH(MPH) step or use
the button next to 10 to change in 10 KPH(MPH) step till the limit reaches
your desired one and press SAVE button.
- 80KPH +
10 SAVE
The adjustment does not affect the vehicle speedometer or odometer
readings, but the auto computer indicated speed and distance only.
To Set Speed Limit(Home>> >> speed>Limited)
To make the TIME OVER SPEED data in RECORD valid, you need to set a
speed limit for the vehicle being tested.
1). Use the button next to LIMITED.
ADJUST
LIMITED
5). Use upper left or rig ht button to adjust the speed in 1% step till the
lower rig ht figure agrees with the indicated distance and press SAVE.
- 5% +
60 63 SAVE