Roadi Turbo Gauge - Manual (Page 11)

9
5). A warning message comes up asking for your confirmation.
6). If you wish to erase codes, press YES. When codes are cleared
successfully, an "Erase Done!" message comes up. If codes are not
cleared, a "Failed!" message appears.
Erase Codes ?
YES NO
7). Choose the "Back" to return
8). If you do not wish to erase code, press NO button to exit.
Erase Done!
Back
P2033 Pd ERASE
3/5
4). To erase codes, use the button next to ERASE.
P0335 Pd ERASE
3/5
If a pending code is detected, a "Pd" icon appears.
TRIP GAUGE
SCAN SETUP
DTC I/M
FRZD VIN
P1430 ERASE
1/6
2). Press the button next to DTC to view codes.
3). If more than one code is detected, use the button next to and to
view previous or next codes.
If no codes are found, the screen will show "No Codes Found!"”