Roadi Turbo Gauge - Manual (Page 20)

18
2). Use the button next to ADJUST to enter speed correction screen.
8.5. Speed
(Home>> >> speed)
Double press the lower-left button will enter the below menu.
To Do Speed Correction (Home>> >> speed>Adjust)
Speed and distance adjustments are used to compensate for changes in tire
size, gears, tire wear, etc...
1). Press the button next to SPEED.
SPEED DISPLAY
ABOUT DEFAULT
ADJUST
LIMITED
SMP RATE
REC RATE
6). Use the upper-left and upper-rig ht button to change, and press SAVE
button to save the setup. and returns to Rate menu.
3 Seconds
REC Rate SAVE
NORMAL is the factory default rate. If this causes some updates to be
ski pped or irregular operation, SLOW should be used.
4). Use the upper-left and upper-rig ht button to select a sampling rate
between NORMAL and SLOW, and press SAVE button to save the setup. it
returns to RATE Menu.
SMP RATE
REC RATE
NORMAL
SMP Rate SAV
5). To change recording rate, press the button next to REC RATE.
3). To change system management processor rate, press the button next
to SMP RATE.
2). Press the button next to
RATE.