Roadi Turbo Gauge - Manual (Page 18)

16
4). Use the button next to" ← "or " →"to select a digit, and then use the
button next to "“-”" or "“+”" to increase or decrease value.
5). Press the lower-left button to finish and save the setup, or press the
lower-rig ht hand button to exit without saving the settings.
2). Press the button next to TIME.
20:26:28
2007/08/20
20:26:28
2007/08/20
CBB TIME
FILLUP RATE
●If the HOME screen is set to display information of current tri p,
press the lower-rig ht hand buton to enter HOME screen and then to Tool
Informations
1).press the lower-left button from HOME screen.
8. Tool Information
Tool information includes the follows,
1). Record: The Tri p Recorder.(please see the previous item 6.)
2). Time: Changes time displayed by the auto computer.
3). FILLUP: Used to refuel the vehicle every time
4). Rate: Sets sampling and recording rate.
5). Speed: Adjust and limit the speed
6). Display: Sets contrast, display mode and home screen of the tool.
7). About: The version and conversion.
8). Default: Resets all units, engine displacement, engine type, tank size,
gauge settings, tri p data and screen settings to manufacturer defaults.
8.1 CBB
(Home>>CBB)
See the item 6
8.2 Time (Home>>Time)
3). Press the lower-left button to enter time adjustment screen.
8.3. Fill-up
(Home >> Fillup)
NOTE: In order to get more accurate fuel consumption readings,
and to get valid TANK information, use the FILLUP function every