Casio Stylus - Manual (Page 121)

121
3
Cards
Using an SD card or a MultiMedia Card
The Rugged PDA supports use of SD cards and MultiMedia cards.
For information about using a memory card, see "Accessing Files on
a Memory Card" on page 119.
Precautions when Loading and Removing Cards
• A card has its front and back, it must be oriented correctly when loading it into
the card slot. Attempting to force the card while it is oriented incorrectly can
damage the connectors and/or the slot. Exercise care when loading it. Exercise
care when loading it.
• When inputting or editing data, it is recommended that you store any unsaved
data in main memory before loading or removing a card.
Attaching
1.
Check to make sure that the Rugged PDA is turned off.
• If it is turned on, press the power button to turn it off.
2.
Carefully note which side of the card is the front and which side is the
back. With the front of the card facing the display side of the Rugged
PDA and with the card carefully positioned in the slot, load it into the slot.
• You may feel some resistance when sliding the card into the slot.
Carefully slide the card in as far as it will go, until it is securely in
place.
• Make sure to load the card straight down, not angle it.
N o t e
IT-10_3/101-122.p65 06.6.15, 6:49 PM 121